PLA Pro
Matte Pla
PLA Pro features toughening technology which significantly increases its ductility, allowing PLA Pro to exhibit excellent plastic deformation before fracture.
There
are several advantages:
(1)
Surface Quality at high speed:
When
FDM is printing, the nozzle will continuously change between the min
speed and max speed. The higher the max speed, the wider the range of
speeds. The issue is with the printing temperature being the same,
the extrusion temperature will vary dramatically making the adhesion
between layers uneven. These differences are invisible to the naked
eye, but they will be particularly obvious on the prints if they
appear in each layer, thus making the surface quality of the prints
worse. High Speed filament reduces these differences by improving the
accuracy of inter-layer adhesion in a wide range of flow rates,
allowing prints to have higher precision and more clear details.
(2)
Mechanical Properties at high speed:
High
Speed filament will display far greater overall mechanical properties
when printed at higher speed than regular filament because of the
more consistent extrusion and the optimized cooling/melting rate of
the polymer.
(3)
Higher Printing Efficiency:
Thanks
to (1) and (2), the production speed has increased exponentially, and
3D printing can output the same quality part at a much higher pace.
This advantage makes 3D printing more suitable for producing
products.
PLA
Pro adopts toughening technology, which makes its toughness exceed
90% of PLA materials on the market.
You
can check the tensile modulus and impact strength data in its TDS,
which represent its toughness, and compare it with other materials of
our portfolio.
There
are several advantages:
(1)
Surface Quality at high speed:
When
FDM is printing, the nozzle will continuously change between the min
speed and max speed. The higher the max speed, the wider the range of
speeds. The issue is with the printing temperature being the same,
the extrusion temperature will vary dramatically making the adhesion
between layers uneven. These differences are invisible to the naked
eye, but they will be particularly obvious on the prints if they
appear in each layer, thus making the surface quality of the prints
worse. High Speed filament reduces these differences by improving the
accuracy of inter-layer adhesion in a wide range of flow rates,
allowing prints to have higher precision and more clear details.
(2)
Mechanical Properties at high speed:
High
Speed filament will display far greater overall mechanical properties
when printed at higher speed than regular filament because of the
more consistent extrusion and the optimized cooling/melting rate of
the polymer.
(3)
Higher Printing Efficiency:
Thanks
to (1) and (2), the production speed has increased exponentially, and
3D printing can output the same quality part at a much higher pace.
This advantage makes 3D printing more suitable for producing
products.
Materials
products typically have no expiration date and can be used
indefinitely. However, PLA filaments need to be sealed and stored
after opening to prevent moisture.
If
the material gets damp, bake it in a drying oven at 50-60°C for 6-8
hours before use. Please note that this method cannot restore the
consumables to their optimal condition.
Materials
products typically have no expiration date and can be used
indefinitely. However, PLA filaments need to be sealed and stored
after opening to prevent moisture.
If
the material gets damp, bake it in a drying oven at 50-60°C for 6-8
hours before use. Please note that this method cannot restore the
consumables to their optimal condition.
PLA pro
Matte Pla
