A customer from North America came to repurchase P10. After paying, the customer said: "The heating function of the P10 is really easy to use! This time I will buy three, and next time I will order more according to my production situation. I'm free from preheating resin!"
The customer is engaged in 3D printing services. Last winter, he felt tired! The cold weather led to the molecular activity in the resin slowing down, and the interaction between molecules increased, resulting in increased viscosity and poor fluidity of the resin. Resins with high viscosity cannot flow and fill the printing layer evenly, which will lead to poor surface quality, gelatinization, roughness, deformation, etc. of the model, and in severe cases, it will cause fault and crack.
To avoid the above problems, customers need to use warm water to evenly heat the resin in the bottle. This approach is time-consuming and labor-intensive, and greatly reduces production efficiency. Later, the customer bought two Magforms P10 on the recommendation of a friend.
P10 comes with a constant temperature heating system, so there is no need to preheat the resin. The heating switch on the right side of the screen can heat the print bed to a suitable temperature in a short time. At the same time, it can further control the humidity in the print chamber to prevent excessive humidity from changing the resin properties, thereby ensuring the printing quality and printing success rate.
It seems that the customer thinks the overall use effect of P10 is good, so he chose to repurchase.
A customer from North America came to repurchase P10. After paying, the customer said: "The heating function of the P10 is really easy to use! This time I will buy three, and next time I will order more according to my production situation. I'm free from preheating resin!"
The customer is engaged in 3D printing services. Last winter, he felt tired! The cold weather led to the molecular activity in the resin slowing down, and the interaction between molecules increased, resulting in increased viscosity and poor fluidity of the resin. Resins with high viscosity cannot flow and fill the printing layer evenly, which will lead to poor surface quality, gelatinization, roughness, deformation, etc. of the model, and in severe cases, it will cause fault and crack.
To avoid the above problems, customers need to use warm water to evenly heat the resin in the bottle. This approach is time-consuming and labor-intensive, and greatly reduces production efficiency. Later, the customer bought two Magforms P10 on the recommendation of a friend.
P10 comes with a constant temperature heating system, so there is no need to preheat the resin. The heating switch on the right side of the screen can heat the print bed to a suitable temperature in a short time. At the same time, it can further control the humidity in the print chamber to prevent excessive humidity from changing the resin properties, thereby ensuring the printing quality and printing success rate.
It seems that the customer thinks the overall use effect of P10 is good, so he chose to repurchase.
