Low Precision? High Failure Rate? Then You Definitely Need…
Recently, Magforms received a repeat purchase order from a long-term client in the footwear industry. The client’s previous printer often encountered serious issues when producing 291×108×41mm standard shoe molds. Once the model height exceeded 250mm, precision dropped sharply — textures became blurred, sharp corners were difficult to form, and frequent failures severely slowed production. Frustrated, the client decided it was time to switch equipment.
After thorough comparison, the client was impressed by the performance of the Magforms P13 Pro:
1. A 302×162×380mm build volume enables 6 shoe molds to be formed in a single run, greatly improving efficiency;
2.At a 0.2mm layer thickness, a 300mm-high model can be completed in as fast as 3 hours and 15 minutes;
3. A full-metal frame minimizes vibration, while industrial-grade lead screws and 7μm precision dual linear rails ensure that every shoe mold is formed with exceptional accuracy and detail.
After in-depth discussions with our team, the client grew even more confident in the P13 Pro. Upon receiving our sample shoe mold, they immediately decided to purchase one unit for trial use. In actual production, the P13 Pro delivered outstanding stability and print quality, earning the client’s trust, which ultimately led to their repeat purchase.
